135
address (2): If you select ‘Dynamic IP’, you have to select an Internet
connection session from dropdown menu; if you select ‘Static
IP’, please input the IP address that you want to map to a
specific private IP address.
Client PC IP Please input the private IP address that the Internet IP
address (3): Address will be mapped to.
Computer Name (4): Pull down the menu and all the computers connected to the
router will be listed here. You can easily to select the computer
name without checking the IP address of the computer.
Add (5): Click ‘Add’ button to add the public IP address and associated
private IP address to the DMZ table.
Reset (6): Click ‘Clear’ to remove the value you inputted in Public IP
address and Client PC IP address field.
Current All existing public IP address and private IP Address
DMZ table (7): mapping will be displayed here.
Delete If you want to delete a specific DMZ entry, check
Selected (8): the ‘select’ box of the DMZ entry you want to delete, then click
‘Delete Selected’ button. (You can select more than one DMZ
entries).
Delete All (9): If you want to delete all DMZ entries listed here, please click
‘Delete All’ button.
Reset (10): You can also click ‘Reset’ button to unselect all DMZ entries.
After you finish with all settings, please click ‘Apply’ (11) button and the
following message will be displayed on your web browser:
