MBR L13 – User’s Guide
102
Figure 135: Restore Factory Settings
2. Click OK to restore L13 factory settings.
Note: All L13 settings and parameters, not only those in the Advanced section, will be restored to their default
values. This includes the administrator password; a user-specified password will no longer be valid.
3.8.6.4 L13 Firmware Upgrade
L13 offers a built-in mechanism for upgrading its software image without losing any of your custom configurations and
settings. In order to upgrade the firmware, you must receive an authorized software image file from your operator.
The file should have an rmt extension. Make sure the firmware file is on your PC, on a CD loaded on your PC, or on
another PC on the network, before you begin the upgrade process.
To upgrade the firmware using a locally available .rmt file:
1. Access this feature either from the Maintenance tab under the System screen, or by clicking its icon in the
“Advanced” screen. The L13 Firmware Upgrade screen appears.
Figure 136: L13 Firmware Upgrade
2. Click the Update Now button.
3. Locate the authorized L13 firmware file by using the Browse button.
4. Click OK. The file starts loading from your PC to the gateway. When loading is completed, a confirmation
screen appears, asking if you would like to upgrade to the new version.
5. Click OK to confirm. When the upgrade process ends, L13 automatically restarts, and the login screen of the
updated image is displayed. Your configuration and settings are retained.
3.8.6.5 User Passwords
The User passwords screen shows existing L13 Web access users accounts and can assist you to change their Web
login passwords.
Note: If you are logged into the Use account, you can only change the password for the User account. If you are logged
in as the Administrator, you can change the password for either account.
