IPT2008-SDL Settings
Configurations
Strata CIX and CTX Telephones Administrator 12/04 23
³ Setting Ping Send-to Address
1. Press the Ping Address soft key. The Ping Address
Setting Screen displays (shown right.
2. Using the dial pad, press 1 ~ 0 and * to enter an IP
address or change an IP address. Input the
delimiter “.” by pressing
key.
Press 9RO W to backspace.
3. Press
6(7 soft key to go back to the Loop Back
Test Screen (after rewriting the NV-RAM data if an
IP address is changed). (“Ping to xxx.xxx.xxx.xxx”
will display the IP address after the setting
change.)
Note Pressing the SET soft key can cause the screen
to move to the Input Error Screen if an error
occurred when entering the IP address (shown
right).
4. Press the OK soft key on the Error Screen to go to
the Address Setting Screen.
Note In five seconds after displaying the Input Error
Screen, the screen automatically moves to the
Address Setting Screen. (The address that has
resulted in an input error will be displayed as it
is when moving to the Address Setting
Screen.)
5. Select the CANCEL soft key to cancel the intended setting change and to move to
the Loop Back Test Screen without rewriting the NV-RAM data.
2KPI#FFTGUU5GVVKPI
%WTTGPV
0GY
$CEMURCEG8QN&QYP
=5'6?=%#0%'.?
'4414
+NNGICN&CVC
=1-?
