Description
The CCT-RT Remote Transceiver allows the two Tempest
BaseStation antennas to be located up to 1500 ft (450m) from
the BaseStation without any loss of RF signal. The CCT-RT
is connected to the BaseStation via a standard CAT-5 cable
using RJ-45 connectors. Power is provided over the CAT-
5 cable so that no local power is required for the Remote
Transceiver to operate normally. The CCT-RT is constructed of
aluminum allow. It comes with a universal mounting plate that
can be used to mount the transceiver to poles, walls or other
desired areas.
Operation
One CCT-RT can be connected to a single Tempest
BaseStation (2- or 4-channel). A direct connection is required.
The transceiver will not operate properly if connected to a
Local Area Network (LAN) or routed through a network device
such as a router or switch. The transceiver has two RP-TNC
antenna connectors on top of the enclosure that can attach the
standard 2dBi whip antennas, or employ optional directional
antennas via low loss 50; coaxial cable.
LED Indicators
The CCT-RT is equipped with ve LED indicators so that the
user can ensure proper operation of the transceiver.
RX and TX LEDs indicate proper data transfer to and from the
BaseStation and wireless BeltStation.
2 RU Lever key V-Series Panel
Tempest
®
2400 Wireless
CCT-RT Remote Transceiver
Sync and Cong LEDs indicate that the
transceiver has been properly initialized and is
communicating with the BaseStation.
Power LED illuminates whenever the BaseStation
is providing adequate power to the transceiver
over the CAT-5 cable.
Environment
The CCT-RT is weather resistant and is intended
for use outside. It is recommended, however,
that in extreme weather conditions appropriate
measure are taken to ensure that no water enters
into the enclosure.
Features:
• For use with the Tempest 2400 GHz model
• Allows remote location of antennas from
the base with no RF signal loss
• Operates on standard RJ-45 CAT-5 cable
• Cable runs up to 1500 ft (450 m)
• Power is provided over the cable from
BaseStation
• Durable metal enclosure
• Weather resistant for outdoor use
• RX, TX, Sync, Cong and Power LED
indicators
• 2 RP-TNC antenna connectors
• Can remote antennas from the Transceiver
with low loss coaxial cable
