Explicit Call Transfer (ECT)
94 FRITZ!Box Fon 5124 – 10 Configuration and Operation by Telephone
Explicit Call Transfer from a Three-party Conference Call
N
Pick up the handset.
M
Dial the external number of the first party. Talk.
R
Press the Hold button.
M
To dial a second call, simply dial either the
desired extension number or the outside line
access “0” followed by the desired external
number. You can now talk to the second
subscriber while your first call is on hold.
R3
Dial the sequence shown at left to begin a three-
party conference call.
D
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant
remains active.
To clear your connections while allowing the
external parties to continue the call, connect the
parties with each other.
R2
You can also switch from the three-party call back
to the original two-party connection. Dial the
sequence shown at left. This ends the three-party
conference. The connection that was active last
before your initiated the three-party conference is
now active again. The second external call is on
hold. You can alternate between the two
connections by dialing the same sequence again.
R4
Dial the sequence shown at left. The connection
on hold and the active connection are connected
with each other. The external parties continue the
call while you clear the connection.
O
Hang up the handset.
