15 of 34
TX Settings
Lock TX Switch
To prevent unauthorised or accidental changes of frequency or gain on a
transmitter, or accidentally turning a transmitter off during a performance you
can lock these features from the receiver.
Press the “Jog-Wheel” to show the
MAIN MENU. Rotate the “Jog-Wheel”
to underline TX SET and push to select
this option. Rotate the “Jog-Wheel” till
LOCK is underlined and push to select
this. Push the “Jog-Wheel” to check the
box for POWER if required, or rotate to
go to FREQ/GAIN and push to check
this box if required.
Rotate till EXIT is underlined and push.
You will then have the option to SEND
the TX Locks you have selected, to a
transmitter or CANCEL. If you are
sending Locks to a transmitter you
should hold it within 15cm of the
receiver and with the infra-red windows
of each aligned.
