TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
25
5. Maintenance
6 Remove the handset from the Desktop Programmer (DP1)cradle. The handset is
restarted.
7 Enter the number and the password
3
(if any). Press “Login”.
8 Make sure that the spare handset is saved in the Device Manager (indicated by a
in the Saved column. If not, in the Numbers tab, right-click the spare handset and
select “Save“.
9 Switch off the spare handset to make it offline.
10 Switch on the broken handset to make it online.
11 In the Device Manager, select the “Licenses“ tab.
12 Right-click the broken handset and select “Move license...“.
13 In the Move li
cense window,
select the Talker that should receive the license. Press
“OK“.
14 The broken handset restarts and has now become a Talker. Switch
off the broken
handset to make it offline in the Device Manager.
15 Switch on the spare handset to make it online in the Device Manager.
16 I
n the Device Manager, select the “Licenses“ tab. Right-click the spar
e handset and
select “Refresh“.
The spare handset is automatically updated from the IMS3 and restarted. The last stored
settings a
nd licenses for the broken handset in the IMS3 has been transferred to the spare
handset.
5.2.4 Replacement of Handset with PDM Only
Replacement via PDM is used in small VoWiFi systems or when IMS3 is not a
vaila
ble.
• If the broken handset and the spare handset have the same device type and
functionality license, see Replace
without Move Licenses using PDM.
• If the broken handset and the spare handset have not the same device type and/or
functionality license. The
license must be moved to the spare handset, see Replace and
Move Licenses using PDM.
Replace without Move Licenses using PDM
Both the broken handset and the spare handset m
ust be
of the same device type and have
same functionality license
1 In both handset, press *#34# in idle mode and select “License“ to check that they
have same device type and l
icenses.
Alternatively, if the spare handset has bee
n factory reset, press “Info“ and select
“License“.
2 Put the broken handset in the Desktop
Programmer (DP1) cradle
3 Open the PDM.
4 Make sure that the handset is saved in the PDM. In the Num
bers tab,
a saved handset
has the symbol
in the Saved column. If not, right-click the handset and select
“Save“ in order to transfer the settings to the spare handset
later on.
5 If the spare handset has been previously used, perform a factory reset, see
5.1.8
Perform a Factory reset on page 21.
6 Put the spare handset in the Desktop Programmer (DP1) cradle
7A Fo
und Device Wizard window
appears. Select “Associate with Number“ and click
“Next >“.
