TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
22
5. Maintenance
5.2 Replacement of Handsets
A handset can be replaced with a spare handset if it is broken. The handset registered in
PDM or IMS3, is associated with its device type, device ID and extension. During the
replacement procedure, the broken handset’s device type and extension will be associated
with the spare handset’s device ID.
5.2.1 Replacement Procedure Choice
• If you have IMS3 and already have applied the network template to the spa
r
e handset(s)
to log on it later on, see 5.2.2 Replacement of Hand
set with IMS3 on page 22.
• If you have both PDM and IMS3, and need to apply the network tem
plate to the spare
handset(s) to log on it later on, see 5.2.3 Replacement of the Handset with PDM and
IMS3.
• If you only have PDM, see 5.2.4 Replacement of Handset with PDM Only.
Data included in a replacement transfer
The following data is replaced during a re
placement:
•U
ser parameters
• Contacts (entered by the user)
Note that the following data is not replaced:
• Call list
• Messages
• Company phonebook
• Downloaded language
• Certificates
•Licenses
1
5.2.2 Replacement of Handset with IMS3
There are two different replacement procedures as fo
llows:
• If the broken handset and the spare handset have the same device type and
functionality license, se
e Replace without Move Licenses in IMS3.
• If the broken handset and the spare handset have not the same device type and/or
functionality license. Th
e license must be moved to the spare handset, see Replace and
Move Licenses in IMS3 on page 23.
Replace without Move Licenses in IMS3
Both the broken handset and the spare handset m
u
st be of the same device type and have
same functionality license.
1 In both handsets, press *#34# in idle mode and select “License“ to check that they
have
same device type and licenses.
If the login screen is displayed in the spare handse
t, press “Info“ and select “License“.
2 If the broken handset is online in the Device Manager, switch off the handset to make
it offline.
3 Take a spare handset prepared with the networ
k settings (including the IP-address to
the IMS3).
1. A handset’s license(s) can be moved to an unlicensed handset (Talker) if following the replacement instructions in
Replace and Move Licenses in IMS3 on page 23.
