Chapter 5 Easy Mode
WAP3205 User’s Guide
36
Click Status to open the following screen screen.
Figure 13 Easy Mode: Status Screen
5.2 What You Can Do
You can do the following in this mode:
•Use this Navigation Panel (Section 5.4 on page 37) to opt out of the Easy
mode.
•Use the Network Map screen (Section 5.5 on page 37) to check if your
WAP3205 can ping the gateway and whether it is connected to the Internet. The
Network Map screen is not applicable when the WAP3205 is in Client Mode.
•Use the Control Panel (Section 5.6 on page 38) to configure wireless security.
•Use the Status Screen
screen (Section 5.7 on page 42) to view read-only
information about the WAP3205, including the LAN IP, MAC Address of the
WAP3205 and the firmware version.
5.3 What You Need to Know
The Network Map screen is not applicable and Wireless Security in the control
panel is not configurable when the WAP3205 is in Client mode.
Control Panel
Status Screen
Go to
Network
Map
Screen
Navigation Panel
