17
Delay start
Can be set between 1 and 9 hours.
The start of the selected program can be delayed bet-
ween 1 and 9 hours in steps of 1 hour using the “DE-
LAY START” button.
– By repeatedly pressing the button “DELAY
START”, the delay time can be programmed in
hours, and will be displayed in the display field. The
control lamp flashes until the door has been clo-
sed.
Before washing commences the door can be opened
without the program being lost.
After the pre–selected start time has expired, the ma-
chine starts up the selected program automatically.
Program selection /
Correcting or deleting
delay start
1. Open the door.
The time remaining before washing commences is in-
dicated on the control panel.
2. Press the “CANCEL” button for at least three se-
conds.
The start delay program is deleted.
Press the “CANCEL” button again to delete the was-
hing program.
– Select the program again and start it or program
the start delay again.
Save energy
The wash temperature is reduced using the “ECO
PLUS” button, as a result less energy is consumed
during heating up
End of the program
A repeated acoustic signal tells you that washing has
finished.
A line flashing in the program display also indicates
that washing has finished.
Delay start control lampe
Delay start button
CANCEL /
Correction button
Start time / Remaining time display /
Error message
”ECO PLUS” button
Start time /
Remaining time display /
Error message
