
D
ISHWASHER
6
ARISTON DISHWASHER - Instructions for installation and use
Never without salt
Loading the salt.
Always use salt which is intended
for dishwasher use.
The salt container is situated
underneath the lower rack, fill it
up as follows:
1. Pull out the lower rack
completely, unscrew and
remove the container cap
2. Is it the first time you load the
salt? First fill the container up
with water (you won't have to
do this again next time)
3. Put the dishwasher funnel on
the hole and pour in
approximately two kilos of
salt. It is normal that some
water comes out of the
container.
4. Screw the cap back in place
carefully.
Water in your home
When should I load the
salt?
The salt container should be filled
up when the low salt indicator
light "M" lights up and the words
"add salt" scroll across the display.
Water hardness varies according to where you live. If the water in
your home is hard, without water softening, incrustations would
form on your dishes. Your dishwasher is fitted with a water softener
which uses special salt to get rid of limescale in the water.
Detergent and rinse aid
The rinse aid.
This product makes dishes sparkle
more as it improves their drying.
The rinse aid container is situated
on the inside of the door. You
should fill it up when the low rinse
aid indicator light "O" lights up on
and the words "add rinse aid" scroll
across the display.
The detergent
Loading the detergent
To open lid A, press button B. The
detergent should be poured into
the two containers up to the rim.
Now you can close the lid: press it
down until you hear it click.
If you prefer to use the detergent
in tablet form, then place one
inside the container "D" and close
the lid.
It won't close!
Check whether there is any
detergent residue on the edges of
the dispenser. It is due to this resi-
due that the lid won't close. Get
rid of it and you'll see that it closes.
Only use specific dishwasher detergents. Pour the detergent into the
dispenser on the inside of the door. Before the wash cycle starts!
Useful tips
To prevent rust
from forming,
load the salt just
before beginning
a wash cycle.
Intelligent salt.
Your dishwasher can adjust its salt
consumption according to the
hardness of the water in your
home. It will add the correct
quantity to the wash cycle, thus
optimising and customising the
salt consumption (not too much
nor too little). At the end of the
wash cycle, if your dishwasher
detects a water hardness which is
below the default threshold, the
message "do not use any salt" will
appear.
Use the right
amount of
detergent: if you
use too much, you
will not get cleaner
dishes, but just
more
environmental
pollution.
Keep your
dishwasher
detergent and rinse
aid in a cool, dry
place and away
from children.
Proper dosage of
the rinse aid
improves drying.
If drops of water
remain on the
dishes or spotting
occurs, turn the
dosage adjuster to
a higher setting.
If, on the other
hand, the dishes
have white
streaks, then turn
the dosage
adjuster down to a
lower setting.
C
A
B
D
5
gr.
25
gr.
F
C
Loading the rinse aid.
To open the dispenser, turn cap C
anticlockwise. Take care when
you pour in the rinse aid to avoid
it overflowing. You can adapt the
amount of rinse aid used by the
dishwasher: use a screwdriver or
a coin to adjust the dosage
adjuster F situated underneath
the lid C.
You can choose from six different
positions. It is normally set to 4.