GB
-1-
Chart
PROGRAMS
SELECTION BUTTON
Push “Programs” button
(repeatedly) until the
indicator of the required
program lights up (see
“Table of programs” -
next page).
POWER CLEAN MAX
Thanks to the additional
power jets this option
provides a more intensive
and powerful wash in the
lower rack, in the specific
area. This option is
recommended for
washing pots and
casseroles (see page 7).
Press this button to
activate Power Clean (the
indicator lights up).
DELAYED START
BUTTON
Push the button
(repeatedly) to delay the
start of the program.
Adjustable from 1 to 24
hours. With each press of
the button, the delayed
start indicator increases
by one hour and after 24
restarts from 0. Then
press the START button.
The dishwasher will start
after the set time.
RINSE AID INDICATOR
When lit (at the end of the cycle), the
rinse aid dispenser needs to be refilled.
GSI 6143 TR A+
5019 496 01678
ANTIBACTERIAL
RINSE
3)
This function activates an
antibacterial rinse at the end
of the wash cycle,
guaranteeing a further
reduction of bacteria. Press
the button to activate or
deactivate the function. This
function can be used with
the programs indicated in
the table of programs. The
dishwasher door must be
kept shut for the entire
duration of the program in
order to guarantee
reduction of bacteria. If the
door is opened the indicator
lamp starts flashing.
TABLET SETTING
This setting allows to
optimize the cycle
performances according
the type of detergent
used. Push the Tablet
button for 3 seconds (until
the indicator lights up) if
you are using the
combined detergents in
tablet (rinse aid, salt and
deteregent in 1 dose). If
you are using powder
detergent or liquid
detergent, the Tablet
indicator on the control
panel has to be off.
SALT INDICATOR
When lit (at the end of the cycle), the
salt reservoir needs to be refilled.
WASH TIME DISPLAY
Indicated the cycle duration and the remaining time (h:min). With “Delayed start” selected it
indicates the time remaining until program start (h.00) - below 1h (0:min).
If “Fx Ey” messages appears on the display, see page 9 - chapter “What to do if...”.
START/RESUME
BUTTON
Push this button to start the
selected program: the
indicator lights up and goes
off at the end of the program.
When the door is opened
during a washing cycle, the
cycle is temporarily paused:
the Start indicator blinks.
To resume the cycle close
the door and push Start
button again.
CANCEL/OFF
BUTTON
Push this button to switch off
the control panel.
If pressed when a program
is running it cancels the
program ongoing draining
water for 1 minute (0:01 is
shown into the display).
If pressed when the
dishwasher is switched
off, it drains any possible
liquids from dishwasher
(1 minute process).
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
Quick reference guide
