11
When the machine is started up the first time at the beginning of the
day, wait for the resistances to heat the water contained in the boiler
and in the tank, for the key to light up green and for the
machine ready icon to appear.
CHOOSING AND STARTING A WASH PROGRAM
Use the button to select the wash program: one of the LEDs of
the selected cycles will light up: or .
P1: duration 60”
P2: duration 120”
P3: duration 180”
P4: duration 480”
Program P4 can be used to finish with the rinse cycle, by pressing the
START button again (blue) during the wash phase.
In order to start up the wash cycle, press
During the cycle in course, will light up blue and the cycle LED will start blinking. If the door is opened while the wash cycle is in
progress, the program will stop. When the door is closed again, the program resets. In order to re-start the wash cycle, press the
cycle button again.
When the program is completed, from blue turns yellow and the
cycle LED stops blinking.
5.3 – MANUAL COLD RINSE AT THE END OF THE CYCLE (optional)
On some models it is possible to set a cold rinse at the end of the
cycle.
Start the wash cycle by pressing , and while the cycle is in
course keep the key pressed until lights up.
5.4 – DIGIT REGENERATION CYCLE (models with built-in water softener)
AUTOMATIC REGENERATION CYCLE
The regeneration cycle is automatic. The dishwasher is equipped with
a wash meter. When the set number of cycles is reached, the
dishwasher will activate the regeneration function the first time it is
switched off and the tank is emptied.
When the machine is working normally and the set number of cycles
is reached, the blinking icon appears. This points out that the
machine will activate the regeneration function the next time it is
switched off.
