10
LOADING THE DISHWASHER
The basket can hold 12 dishes or 18 plates.
Remove any solid leftovers from the plates (bones, peel, nuts etc);
leave the plates to soak in cold water if there are any stubborn
leftovers, such as dried cheese, egg etc.
Put the glasses in the basket with their stem upwards.
Use the cutlery basket for cutlery. Put the cutlery loose in the basket,
preferably with the handle at the bottom. Be careful not to injure
yourself on the fork prongs and knife blades.
Wait for 15 minutes after the boiler led indicator light to turn off.
CHOOSING A WASH PROGRAM (not available on all models)
You can select the wash program using the cycles selector.
To start the wash cycle, press the cycle button.
Once the cycle has started, the wash cycle led indicator light turns on. If the door is opened during the cycle, the program stops. Once
the door has been closed again, the program resets itself; to restart the cycle, press the cycle button
Once the program has finished, the wash cycle led indicator light turns
off and the boiler led indicator light turns on.
5.2 – OPERATING PHASES OF DIGIT MODELS
The control panel and the graphics shown in the manual
might show functions that are not provided on your machine.
Activate the wall-switch, open the door and insert the overflow, close
the door.
Press the on/off button , the selected cycle lights up, water is
filled into the boiler and into the tank.
When both the boiler and the tank are filled, the lights up
yellow.
LOADING THE DISHWASHER
Remove any solid leftovers from the plates (bones, peel, nuts etc);
leave the plates to soak in cold water if there are any stubborn
leftovers, such as dried cheese, egg etc.
Put the glasses in the basket with their stem upwards.
Use the cutlery basket for cutlery. Put the cutlery loose in the basket,
preferably with the handle at the bottom. Be careful not to injure
yourself on the fork prongs and knife blades.
