User instructions
41
If an alarm occurs the
program in progress and signals a fault.
•
Alarms E1, E2, E3, E4, E8 and E9
the current program immediately.
•
The E5, E6
alarms interrupts the running
program once the cause is resolved, it will
bring bach the execution of the program.
•
The alarm E7
is visualized at the end of the
cycle that comes, however, brought to the end
since the operation of the dishwasher is not
harmed.
To “reset” an alarm is necessary:
•
Open and close the door, or turn off and on
the
machine. At this point is possible to
program the dishwasher again.
If the problem persists, disconnect the
dishwasher from the electrical power supply,
shut off the water tap and contact the after-
service.
