BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
5019 300 01633
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
PROGRAMS
SELECTION
BUTTON
Push “Programs”
button
(repeatedly) until
the indicator of the
required program
lights up (see
“Table of
programs” – next
page).
TABLET SETTING
This setting allows to
optimize the cycle
performances
according the type
of detergent used.
Push the Tablet
button for 3 seconds
(until the indicator
lights up) if you are
using the combined
detergents in tablet
(rinse aid, salt and
deteregent in 1
dose). If you are
using powder
detergent or liquid
detergent, the
Tablet indicator on
the control panel has
to be off.
RINSE AID
INDICATOR
When lit (at the
end of the
cycle), the rinse
aid dispenser
needs to be
refilled.
SALT
INDICATOR
When lit (at the
end of the
cycle), the salt
reservoir needs
to be refilled.
START/RESUME
BUTTON
Push this button to
start the selected
program: the
indicator lights up
and goes off at the
end of the program.
When the door is
opened during a
washing cycle, the
cycle is temporarily
paused: the Start
indicator blinks.
To resume the cycle
push Start button
and close the door
within 3 seconds.
CANCEL/OFF
BUTTON
Push this button to
switch off the control
panel.
If pressed when a
program is running it
cancels the program
ongoing draining
water for 1 minute.
If pressed when the
dishwasher is
switched off it drains
any possible liquids
from dishwasher
(1 minute process).
If the indicator flashes
repeatedly, see page
9 – chapter “What to
do if ...”.
1/2 LOAD
BUTTON
Half load cycle can
be used for the
upper or lower
rack. Select the
required program
then press the
“Half Load” button
- the light comes
on. Turns off at the
end of the
program. The
“Half Load” option
can be used with
the programs
indicated in the
table of programs.
DELAYED START
BUTTON
The wash cycle can
be programmed to
start after 2, 4 or
8 hours. Then
press the Start
button.
The wash program
will start after the
set time.
