W150M+150Mbps Wireless AP
41
MAC Address: The device’s physical MAC address as seen
on your local network is unchangeable.
IP Mode: There are two modes, Static IP and Dynamic IP. If
you select Static IP, you need to input the parameters provided
by your ISP. If you choose Dynamic IP, you should adjust the
connection properties to obtain an IP address and DNS sever
automatically in Internet protocol.
IP Address: The device’s LAN IP addresses. 192.168.2.1 is
the default value. If you change it, you need to use the new IP
to login to the Web interface.
Subnet Mask: It’s shown the device’s subnet mask for
measurement of the network size. 255.255.255.0 is the default
value.
Default Gateway: Input the Gateway provided by your ISP.
If you are not sure, please consult your ISP.
Primary DNS Sever: Input the primary DNS sever provided
by your ISP.
Secondary DNS Sever: you can input it or empty it. The
