W150M+150Mbps Wireless AP
40
Chapter 6 Advanced Settings
6.1 LAN Settings
This section will describe how to configure the TCP/IP parameters.
6.1.1. LAN settings in WISP and Wireless Router mode
MAC Address: The device’s physical MAC address as seen
on your local network is unchangeable.
IP Address: The Router’s LAN IP addresses (not your PC’s
IP address). 192.168.2.1is the default value. Once you change
it, you need to use the new IP to access the router.
Subnet Mask: It’s shown the Router’s subnet mask for
measurement of the network size. 255.255.255.0 is the default
value.
6.1.2. LAN settings in AP, Client+AP and WDS+AP mode
