W150M+150Mbps Wireless AP
30
After configuration complete, the AP works as a wireless signal
repeater. You can connect the device to computer, satellite receiver
and IPTV set-top box and you need to set them to obtain IP address
automatically to access the source wireless device (source wireless
router). Detailed settings refer to the Appendix I.
5.4 WISP Mode
Log on the web-based interface as chapter 4 and then configure the
mode as below.
5.4.1. Select “WISP”, click “Setup Wizard” and “Next” button.
5.4.2. Configure the parameters
SSID
SSID (Service Set Identifier) is the unique name of ：
