Wireless AC1200 ADSL2+ Dual Band Modem Router
138
Network Authentication: Select Open, Shared, 802.1X, WPA-PSK, WPA2-PSK or Mixed WPA/ WPA2-PSK from the
drop-down list to encrypt your wireless network.
Depending on the type of network authentication you select, you will be prompted to enter corresponding settings.
WEP Encryption: Select Enabled or Disabled.
Encryption Strength: Select 128-bit or 64-bit.
Current Network Key: Select a network key to be active.
Network Key 1/2/3/4: Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys; enter 5 ASCII
characters or 10 hexadecimal digits for 64-bit encryption keys.
WPA/WAPI passphrase: Enter a WPA/WAPI network key.
WPA Group Rekey Interval: Specify a key update interval.
WPA/WAPI Encryption: Select AES or TKIP+AES.
Apply/Save: Click it to apply the current configurations.
3.1.3 MAC Filter
Click Wireless > 2.4G > MAC Filter to enter the page where you can configure the MAC filter of wireless network of
2.4GHz. The MAC-based Wireless Access Control feature can be used to allow or disallow clients to connect to your
wireless network on the base of device’s MAC address.
