Wireless AC1200 ADSL2+ Dual Band Modem Router
135
IPTV configuration for Phone Cable Access user:
1) Enable IPTV.
2) Select Layer2 interface: ATM Interface.
3) Configure an avaliable VPI/VCI value which should be provided by your ISP.
4) Click Apply/Save.
IPTV configuration for Ethernet Cable Access user:
1) Enable IPTV.
2) Select Layer2 Interface: ETH Interface.
3) Click Apply/Save.
After successful IPTV configuration, Port 4 on the back panel of the device can only be an IPTV port
Tip
For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID.
For untagged service, set -1 to both 802.1P Priority and 802.1Q VLAN ID.
3. Wireless
3.1 2.4G
There are five submenus under the Wireless menu Wireless: Basic, Security, MAC Filter, Wireless Bridge and
Station Info. Click any of them, and you will be able to configure the corresponding functions.
