Watching the TV
Many TV features can be accessed directly
through the remote control. The following
chart will explain the function of some
buttons found on your remote control.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL /45 YOU
REVIEW/ THIS CHART
Using the White Labeled Buttons fot;^rojection TV Operations.
TV (FUNCTION) Activates the remote control for use with the projection TV.
TV POWER Turns the projection TV on and off. It a video input indication (e.g., VIDEO 1,
VIDEO 2) appears on the screen, press TV/VIDEO until a channel number
appears.
®-(9)
and ENTER
Use for direct channel selection. Press 0-9 to select a channel (for example,
to select channel 10, press 1 and 0), the channel will change after 2 seconds,
or you can press ENTER for immediate selection.
CH+/-
Press to scan through the channels (-r up or - down).
VOL +/-
Press to adjust the volume (-r up or - down).
JUMP Press to alternate or jump back and forth between two channels. The projection TV
will jump between the current channel and the last channel selected using the 0-9
buttons.
MUTING Press to mute the sound. “MUTING” will appear on the screen and will dim
three seconds later. Press again or press VOL -r to restore sound.
(continued)
PICTURE MODE
Press PICTURE MODE repeatedly to choose
one of five different video modes that best suits
the program you are watching directly.
You can also adjust the picture items for each
mode to suit your taste. When adjusting them,
first select each MODE individually.
VIVID: Select for enhanced picture contrast and
sharpness.
STANDARD: Select to display a standard
picture for normal viewing environments.
MOVIE: Select to display a finely detailed
picture for low light environments.
GAME: Select to display graphics such as a
video game.
PRO (Professional): Select to display a picture
with minimum enhancements.
For more adjustments, see ‘‘Using the VIDEO
Menu" on page 35.
25
