Channel Caption
(CT-2786VY only)
This feature allows you to enter the call names of up to 30
stations into memory {using up to 4 characters for each
station). The Channel Caption will then display along with
the channel number when changing channels or pressing
RECALL.
CH 03
KXYZ
Channel Caption
(Station Identifier)
1. Press ACTION button on the TV or Remote (some
models).
2. Press A / ▼ and ^ ^ buttons to highlight the
Channel Caption Icon.
3. Press ACTION button to display the Channel Caption
Menu.
pTaiMi!:;
ieH’ANNEffGABTIONl
ENTER CHANNEL NUMBER
ENTER
Press ^ ^ button or use the Remote Control
Keypad (some models) to enterthe channel numberyou
wish to assign a Station Identifier.
Press ▼ button to highlight ENTER CAPTION.
Press ^ / ^button to select first character in Station
Identifier. Then press ▼ button to move cursor to the
second position and repeat until the complete Station
Identifier is entered (up to 4 characters).
Press A / ▼ button to highlight ENTER CHANNEL
NUMBER. Then repeat steps 4 through 6 to continue
adding Channel Station Identifier(s).
Press ACTION button twice to exit menus.
NOTE; To delete a Channel Caption (Station Identifier) from
memory, all four character positions in the “ENTER
CAPTION” area must display a dash mark (-).
4.
5.
6.
7.
8.
Hints:
When the Maximum amount of station identifiers are
entered, “FULL" will be displayed in the caption
position.
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60 or 90
minutes. Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn off. The Recall display will
also appear.
NOTE: This feature will be disabled when Auto Power
On is activated.
1. Press ACTION button on the TV or Remote (some
models).
2. Press A / ▼ and ^ ^ buttons to highlight the
Timer Icon.
3. Press ACTION button to display the Timer Control
Menu.
4. Press ^ button to select NO, 30, 60 or 90 minutes
(Sleep Timer will be activated).
5. Press ACTION button twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1 through 4.
In step 4 select “NO” instead of minutes.
^ ^
Press the RECALL button to display the remaining
minutes for Sleep Timer, the status wilt display in the
bottom left corner (red).
-17-
