E-25
ON/
Standby
M
E
M
O
R
Y
Removing the USB memory
Check that the flashing rotation of the display window has changed to steady lighting
and that the USB memory access indicator is not flashing, then pull the USB memory
straight out. (Please see your USB memory manual for details.)
• Do not unplug the USB memory device during the USB memory storage opera-
tion (i.e., during the rotating, flashing display in the display window), or while
the access indicator of the USB memory device is flashing because data will be
destroyed.
When the Captureboard is not going to be used, press the ON/Standby button and switch
off the power (standby mode).
• When the Erase Reminder function is set to "Enable"
When the ON/Standby button is pressed, the display window and all the indicators flash
simultaneously, the sheet automatically moves to the surface that is not yet erased and
the power turns off.
* The Erase Reminder function may not work properly due to dirt on the sheet's adhesive
sections or marker residue.
• “
” letters appearing at one-second intervals in a moving display in the display window indicate that a USB
memory device is mounted. Unplugging the USB memory device will switch off the power. (A function that
serves as a reminder to unplug the USB memory device)
• If no button is operated for 30 minutes or greater, the unit is set to the sleep mode and the LEDs on the control
panel turn off. If the ON/Standby
button is pressed, the LEDs on the display window turn on. If the save but-
tonis pressed at this time, storing of the data in the USB memory device starts.
Notice
Display window
Note
Using USB Memory
