18 Chapter 2 How to run the Booklet maker
Run the Job
Run the Job
1. Make sure the adjustments on the Booklet maker are complete before you release the
print job from the print queue.
2. Start the print job. The Booklet maker starts automatically.
3. Check the quality of the first book.
4. If the quality is not acceptable, make adjustments (see ‘Book Quality’ on page 63).
Result
During the job
■ Unload books from the stacker before the stacker is full. The Booklet maker stops
and displays a message if the stacker is full.
■ Empty the trim bin from time to time. The Booklet maker displays a message if
the trim bin is full (see ‘Empty the Trim Bin’ on page 43).
