Once the appliance is positioned, level the
dishwasher by adjusting the feet 1 and 2 (screw in
or out). The inclination angle must not exceed
more than 2°.
Ensure that the space between the contact
surfaces at the top of the appliance is not more
than 5 mm. Align the appliance door with the edge
of the kitchen furniture unit.
• Connect the inlet and drain hoses
as the power cord.
• Stick the safety adhesive covering 3 to the
inner side of the working surface in the unit
where the dishwasher is to be installed. To
do that, first remove the stripe of paper to
set the adhesive
covering is intended to protect the furniture
surface from the steam which comes out of
the dishwasher
in small quantities every
time you open the door of the appliance.
• Putting the dishwasher on slide-rails 4.
• Push the dishwasher into the unit.
• Fix the dishwasher in the unit with two
countersunk head screws 5.
While installing the dishwasher
space for the appliance door 6 to open.
