Settings
Programme selection mode
and user mode
When the appliance is in programme selection
mode it is possible to set a programme and to
enter the user mode.
In user mode, the following settings can
be changed:
• The level of the water softener according to the
water hardness.
• The activation or the deactivation of the
acoustic signal for end of programme.
• The activation or deactivation of the rinse aid
dispenser when you want to use the Multi tab
option without rinse aid.
These settings will be saved until you
change them again.
How to set the programme selection
mode
The appliance is in programme selection mode
when the programme indicator 50° Eco is on
and the display shows the programme duration.
When you activate the appliance, usually it is in
programme selection mode. However, if this
does not happen, you can set the programme
selection mode in the following way:
Press and hold simultaneously Eco and Auto until
the appliance is in programme selection mode.
The water softener
The water softener removes minerals from the
water supply, which would have a detrimental
effect on the washing results and on the
appliance.
The higher the content of these minerals, the
harder your water is. Water hardness is
measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in your
area. Your local water authority can advise you
on the hardness of the water in your area. It is
important to set the right level of the water
softener to assure good washing results.
Water hardness
German degrees
(°dH)
French degrees
(°fH)
mmol/l Clarke de-
grees
Water softener level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
Dishwasher User Manual10
