Problem Possible cause Solution
The shaver does
not shave as well as
it used to.
The shaving heads are damaged or
worn.
Replace the shaving head holder (see
chapter ‘Replacement’).
Long hairs obstruct the shaving heads. Clean the shaving heads by following
the steps of the extra-thorough
cleaning method (see chapter ‘Cleaning
and maintenance’).
Specic types only: The Jet Clean
System has not cleaned the shaver
properly, because the cleaning uid in
the cleaning chamber is soiled or the
cleaning uid level is too low.
Clean the shaver thoroughly before you
continue shaving. If necessary, clean and
rell the cleaning chamber (see chapter
‘Cleaning and maintenance’).
The shaver does
not work when I
press the on/off
button.
The rechargeable battery is empty. Recharge the battery (see chapter
‘Charging’).
Specic types only: The travel lock
is activated.
Press the on/off button for 3 seconds
to deactivate the travel lock.
The shaving head holder is soiled or
damaged to such an extent that the
motor cannot run.
Clean the shaving head holder or
replace it (see chapters ‘Cleaning and
maintenance’ and ‘Replacement’).
The temperature of the shaver is too
high. In this case, the shaver does not
work.
Let the shaver cool down. As soon
as the temperature of the shaver has
dropped sufciently, you can switch on
the shaver again.
Specic types only:
The shaver is not
entirely clean after
I clean it in the Jet
Clean System.
The cleaning uid in the cleaning
chamber is soiled.
Empty and rinse the cleaning chamber
and rell it with new cleaning uid.
The cleaning uid level is too low. If the
uid volume in the cleaning chamber
drops below the minimum level during
the cleaning program, the program
aborts.The cleaning light and the
‘cleaning chamber empty’ symbol ash
at intervals and the holder returns to
its starting position.
Rell the cleaning chamber with
cleaning uid to a level between the
two lines (see chapter ‘Cleaning and
maintenance’).
You have used another cleaning uid
than the original Philips cleaning uid.
Only use HQ200 Philips Cleaning Fluid.
ENGLISH26
