Parameter Description
Enable Virtual Server Select to activate the function.
Private IP This is the LAN client/host IP address that the public
port number packet will be sent to. Note: You need to
give your LAN PC clients a fixed/static IP address for
the virtual server to work properly.
Private Port This is the port number (of the above private IP host)
that the public port number (below) will be changed to
when the packet enters your LAN (to the LAN Server/
Client IP).
Type Select the port number protocol type (“TCP,” “UDP” or
“Both”). If unsure, leave it to the default “Both.”
Public Port Enter the service (service/Internet application) port
number from the Internet that will be re-directed to the
above private IP address host in your LAN. Note: The
Virtual Server function will have priority over the DMZ
function if there is a conflict between the Virtual
Server and the DMZ settings.
Comment Enter a description of this setting, if desired.
Add Virtual Server Fill in the "Private IP," “Private Port,” “Type,” “Public
Port” and "Comment" fields of the setting to be added
and click "Add." This Virtual Server setting will then be
