
CONTINUED
The front seats and second row seats
have adjustable seat belt anchors. To
adjust the height of an anchor,
squeeze the two release buttons, and
slide the anchor up or down as
needed (the anchor has four
positions).
Pull out the anchor latch and the
latch plate from each holding slot in
the ceiling, and pull out the seat belt
to extend it.
Insert the hook at the end of the
anchor latch into the anchor buckle
by lining up the triangle marks on
the anchor latch and buckle. Make
sure the belt is not twisted. Push the
anchor latch until it locks. Then
follow the procedure for fastening an
ordinary seat belt (see page ).16
The plus-one seat on EX model also has
this type of seat belt.
Protecting Adults and Teens
Using the Lap/Shoulder Belt in the
Center Position of the Third Row
Driver and Passenger Safety
17
RELEASE
BUTTONS
LATCH
PLATE
ANCHOR
LATCH
ANCHOR
LATCH
ANCHOR
BUCKLE