User Manual
MAN10239-01 29
Printer Setup through USB and RS232/C Ports
The printer Setup parameters can be changed through normal Setup as described in previous chapter or
through USB or Serial 232/C port.
For this purpose is necessary install the ”Compuprint CDC RS-232 Emulation” driver creating a virtual
serial port and the “SP40plus Setup” software, Windows based utility able to configures the printer through
USB (directly) or RS232/C Serial connection (directly or via a serial/USB adapter).
This chapter described how to install the driver and the utility.
This utility can be used also for the Firmware downloading, but this features is not covered with this manual
Compuprint CDC RS-232 Emulation Driver installation
If the printer is connected through the USB interface and the Setup mode is running, the Windows gives a
message for “founds a new hardware, Compuprint CDC RS-232 Emulation”.
Follow the steps displayed in the below masks in order to correctly install the driver.
The information file for the driver is : Compuprint-CDC.inf
