User Manual
MAN10239-01 8
12. Insert the green plastic ribbon mask onto the
print head. Pay attention to match the two pins
(2) on both sides of the green ribbon mask with
the grooves (1) on both sides of the print head.
13. Push the green ribbon mask up until it clicks into
place.
14. Turn the tension knob in the direction of the
arrow to tighten the ribbon
15. Carefully pull down the green lever following the step 3, 4, and 5 in reverse order in order to securely
close the Upper Mechanical Frame.
If you do not LOCK the Upper Mechanical Frame, the printer does not print correctly.
16. Close the printer cover.
Remark
The printer detects the Ribbon Genuine type and the amount of printed characters and stops in error if
appearing.
See “Error Message” later in this manual.
