Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
Configuring Cisco G.SHDSL HWICs in
Cisco Access Routers
First Published: December 23, 2006 OL-11079-01
Last Updated: December 15, 2006
This document describes how to configure Cisco G.SHDSL high-speed WAN interface cards (HWICs).
Cisco G.SHDSL HWICs connect Cisco access routers with central office digital subscriber line access
multiplexer (DSLAMs) and provide as many as four lines of G.SHDSL (ITU-T 991.2) connectivity.
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
Contents
• Prerequisites for Cisco G.SHDSL HWICs, page 2
• Information About Cisco G.SHDSL HWICs, page 2
• Connecting Cisco G.SHDSL HWICs to the Network, page 4
• Configuring Cisco G.SHDSL HWICs, page 6
• Troubleshooting Cisco G.SHDSL HWICs, page 12
• Command Reference, page 22
• Additional References, page 43
