P/N: 4LGE020-010 v3.1, 2012-03-12
© 2012 Lysholm
All Rights Reserved, Intl. Copr. Secured
23
I. Install the supplied new OEM damper retain-
ing bolt as follows:
1. Lightly coat the threads of the new
retaining bolt with red thread locker.
Install and torque to 37 ft-lb. See fig 2G.
2. Using a ½” drive or larger breaker bar,
tighten the retaining bolt an additional
120º or torque to 250 ft-lb. See fig 2H.
J. Automatic Transmission: “Unlock” the
engine from turning by removing the previ-
ously-installed wrench holding the flex plate
and replace the inspection cover.
Manual Transmission: Place the transmis-
sion in Neutral.
Fig 2G
Fig 2H
