
164. On vehicles equipped with HID
headlights, locate the square hole
between the HID transformer and the
headlight. Pass the two hoses for the
intercooler through this hole.
165. In the rubber weather shield beside
the radiator, make a slot or hole for the
hoses from the intercooler to pass.
166. Continue the hose to the upper barb on
the top of the heat exchanger. At this
point cut the hose and push it on the
barb. From the remaining length of hose,
attach one end to the lower barb of the
heat exchanger. Route the hose through
the slot in the weather shield and on to
the outlet barb of the intercooler pump.
Cut the hose and secure all connections
with #10 clamps.
167. From the remaining length of hose,
connect one end to the inlet barb of the
intercooler reservoir with a #10 clamp.
Square Hole