bintec RS353a
09.12.2014
Subject to technical alterations
Page 6 / 10
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
Interfaces
VDSL2/ ADSL 2+/ ADSL xDSL over POTS
Ethernet 5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can be
switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN
or WAN.
USB 2.0 host USB 2.0 full speed host port for connecting LTE(4G) or UMTS(3G) USB sticks (supported sticks: see
www.bintec-elmeg.com)
USB-Console Service-Interface USB 2.0 plug B (driver: see www.bintec-elmeg.com)
Hardware
Status LEDs Power, Status, 10 * Ethernet, VDSL, USB
Realtime clock System time persists even at power failure for some hours.
Wall mounting Integrated in housing
Desktop operation Possible, rubber pad included the package
Environment Temperature range: Operational 0°C to 40°C; storage -25°C to 70°C; Max. rel. humidity 10 - 95%
(non condensing)
Protection Class IP20
Power supply Internal power supply 110-240V 1.5 A, with energy efficient switching controler; complies with EuP
directive 2008/28/EC
Power consumption (idling) Less than 5 Watt
Housing Metal case, opening for Kensington lock, prepared for wall mounting
Dimension Ca. 265 mm x 40 mm x 170 mm (W x H x D)
Fan Fanless design therefor high MTBF
Reset button Restart or reset to factory state possible
Function Button Supported from Release 9.1.10
Standards and certifications R&TTE directive 1999/5/EG; EN 55022; EN 55024 + EN 55024/A1; EN61000-3-2; EN 61000-3-3; EN
61000-4-4; EN 60950-1; EN 300 328; EN 301 489-17; EN 301 489-1;EN 301 893
Content of Delivery
Installation Poster Guide for the Installation
19" brackets and screws Two 19" brackets for the switch panel mounting
Ethernet cable 1 Ethernet cable, 2m
Safety Instructions Safety Instructions
Power cable Power Plug 100-240V / 1,5 A
VDSL/ADSL cable VDSL/ADSL cable (RJ45-RJ11), 3m
Service
