The dishes were not
loaded correctly .
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dis hwasher onl y once t
he dishe s are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket .
In short program the washing temperature is lower.
This also lowers cle aning performance. Choose
a program with a long washing time.
Water drainage is more d ifficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not eno ugh deter gent
was d ispen sed.
Items are blocking
the path of sp ay arms.r
The filter combination
inthebaseofwash
cabinet is not clean or
is n ot correctly fitt ed.
This may cause
the sp ay arm jets
to get blocked.
r
Combinat ion of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
Overflow.
Whe n some malfu nctions come on, the appli ance will displ ay error code s to warn you:
Longer inlet time.
Faucets is not opened, or water intake is
restricted,or water pressure is to o low.
Some element of dishwasher leaks .
E4
E1
E8
Open circuit or break of distributary valve.
Failure of orientation of distributary valve.
NOTE: The progress indicator lights (program steps) on the front of the dishwasher will not stay
illuminated during the wash cycle. This is an energy saving feature and does not indicate a fault with
the appliance.
