pproved Optics, Inc. www.ApprovedOptics.com
Page 1 of 9
FG-TRAN-SFP+LR-A
10GBASE-LR SFP+ SMF
1310NM 10KM REACH LC
FG-TRAN-SFP+LR-A
10Gbase SFP+ Transceiver
Features
•
10Gb/s serial optical interface compliant to
802.3ae
10GBASE
LR
•
Electrical interface compliant to
SFF-8431
specifications for enhanced 8.5 and 10
Gigabit
small form factor pluggable module
“SFP+”
•
1310NM DFB transmitter, PIN
photo-detector
•
2-wire interface for management
specifications
compliant with SFF 8472 digital diagnostic
monitoring
interface for optical
transceivers
•
Operating case temperature: 0°C to
+70°C
•
All-metal housing for superior EMI
performance
•
Low power
consumption
•
Advanced firmware allow customer system
encryption
Information to be stored in
transceiver
•
Cost effective SFP+ solution, enables higher
port
densities and greater
bandwidth
Product
Description
Applications
High-speed storage area
network
Computer cluster
cross-connect
Customer high speed data
pipes
10GE Storage, 8G Fiber
Channel
This 1310 nm DFB 10Gigabit SFP+ transceiver is designed to transmit and
receive
optical data over single mode optical fiber for link length
10km.
The FG-TRAN-SFP+LR-A module electrical interface is compliant to SFI
electrical
specifications. The transmitter input and receiver output impedance is 100
Ohms
differential. Data lines are internally AC coupled. The module differential termination
and
reduce differential to common mode conversion for quality signal termination and
low
EMI. SFI typically operates over 200mm of improved FR4 material or up to
about
150mm
of standard FR4 with
connector.
The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial
optical
data compliant with the 10GBASE-LR standard. An open collector compatible
Transmit
Disable (Tx_Dis) is provided. A logic “1,” or connection on this pin will disable the
laser
from transmitting. A logic “0” on this pin provides normal operation. The transmitter
has
a
internal automatic power control loop (APC) to ensure constant optical power
output
across supply voltage and temperature variations. An open collector
compatible
