Programme
1)
Duration
(min.)
Energy
(kWh)
Water
(l)
70 - 80 0.7 - 0.9 11 - 12
14 0.1 4
1)
The water pressure and temperature, the variations of the mains supply, the options and
the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
5.1 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are
off.
The programme duration can increase.
5.2 ÖKO PLUS
This option decreases the temperature
in the last rinse phase.
The use of this option decreases the en-
ergy consumption (up to 25%) and the
programme duration.
The dishes can be wet at the end of the
programme.
5.3 ExtraHygiene
With this option you have better hygiene
results. During the rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
5.4 Activating the options
Activate or deactivate the options be-
fore the start of a programme. You can-
not activate or deactivate the options
while a programme operates.
It is not possible to activate ExtraHy-
giene and ÖKO PLUS together.
Press
Option
1 time on off off
2 times off on off
3 times on on off
4 times off off on
5 times on off on
6 times off off off
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Adjust the water softener to the high-
est level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the wa-
ter hardness in your area.
5. Adjust the released quantity of rinse
aid.
ENGLISH 25
