Supplementary features
47
eud-0830/2.1 — I7.7 — 10.2008
You can activate a call routing for all terminals. If you have not configured a call routing, the fac-
tory setting (all terminals are ringing) is used as standard.
This function must be stored under a Foxkey or a function key (see Chapter "Configuring Keys",
page 67).
■ Ring Alone
You want to specify which of your terminals shall ring acoustically when you receive a call.
When your system administrator has set up a phone number with several terminals, you can
define on which terminal a call shall acoustically be signalled using Ring Alone.
When you have activated Ring alone on a terminal, the acoustic ringing tone is deactivated for
all other terminals ( ). An incoming call is signalled in the display of all terminals. You can
answer the call on each of your terminals.
This function must be stored under a Foxkey or a function key (see Chapter "Configuring Keys",
page 67).
Configuring personal call routing:
Configuring function key and selecting function:
Personal call routing Activating a call routing.
Personal call routing menu: Overview menu.
Activating personal call routing in idle state:
Press the function key for <Call routing>.
➯ Personal call routing is activated.
Deactivating personal call routing in idle state:
Press the function key for <Call routing>.
➯ Personal call routing is deactivated and the default setting activated.
Or:
You can deactivate the Personal call routing using Menu > Activated features >
Deactivate.
Note:
When you have activated ring alone but deactivated the personal call routing for a terminal in parallel, an
incoming call is not acoustically but only visually signalled.
In the idle state:
Press the function key for <Ring Alone>.
➯ Ring Alone is activated/deactivated.
