ArmorBlock is a trademark of Allen-Bradley Co. Inc.
Publication 1792-5.3 – October 1996
Cat. No. 1792-IB16 Series B
To: See page:
Install
the ArmorBlock
Module
3
Connect the Wiring to the ArmorBlock Module
8
Communicate with Y
our ArmorBlock Module
10
Configure Y
our ArmorBlock Module Of
fline Using the DeviceNet
Manager Configuration T
ool
11
Configure Y
our ArmorBlock Module Online Using the DeviceNet
Manager Configuration T
ool
17
Reset Faults 25
Configure Y
our ArmorBlock Module with EDS Files
28
For this reference information
See page:
Default Configuration
14
Status indicators
38
Troubleshooting 38
Specifications 39
This 1792 ArmorBlock I/O block module (Cat. No. 1792-IB16)
contains I/O circuits, a built-in power supply, and a built-in DeviceNet
I/O adapter. Because of its sealed housing, this 1792 I/O block requires
no enclosure. It is compatible with PLC or SLC programmable
controllers using DeviceNet scanners. The I/O values are accessible
from the PLC or SLC programmable controller data table.
This ArmorBlock module has no switches to set. You set module
parameters using the DeviceNet Manager Software (cat. no.
1787-MGR) or similar configuration tool.
Installation Instructions
