1-20 Initialization
Initialization
The system has been pre-programmed with certain features called
default data (refer to Table 1-1: Default Values) . These f eatures are loaded
into m emory wh en the sy stem is initialized.
Returning System Database to Default Values:
1. Place Switch #1 on the BKSU in the ON position.
2. Turn the power off and on to initialize the system database to the
default.
3. Once database is initialized, place Switch #1 in the OFF position to
protect the database.
Database Programming Worksheets
Before attempting programming, it is strongly recommended that
customer database worksheets be prepared (Refer to Appendix C in the
Product Description Manual). These worksheets s hould become part of
the p ermanent re cord of custo mer programming. Refer to th e f ollowin g
sections when preparing the worksheets.
The system should be initialized when installed or at any time the
database has been corrupted.
