Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
YP-M101TIE-CLIP MICROPHONE
INSTRUCTION MANUAL
1. GENERAL DESCRIPTION
The YP-M101 is a tie-clip type microphone designed
to be exclusively used with an optional WM-1100
Portable Transmitter.
2. NOMENCLATURE
Attach the supplied clip
as shown in the figure.
4. HOW TO USE
5. SPECIFICATIONS
• Keep the microphone 15 – 20 cm away from the
mouth when using.
• Take care not to speak loud or position the
microphone too close (within 5 cm) to the mouth,
because this could muffle sounds and make them
inaudible.
133-05-307-8A
Note: The design and specifications are subject to
change without notice for improvement.
Clip ............................................. 1
• Accessory
Type Electret condenser type
Directivity Unidirectional
Sensitivity –46 dB (0 dB=1 V/Pa,
1 kHz, load: 2 kΩ)
Maximum Input Sound 115 dB SPL
Pressure
Terminal ø3.5 mm monaural plug
Cord Length 80 cm
Finish Dark gray
Weight 20 g (cable included)
