ControlScape ♦ RadioLinx Dialog Boxes
RadioLinx® ControlScape FH User Manual
ProSoft Technology, Inc. Page 117 of 132
March 16, 2011
8.32 Select Download Dialog Box
The Select Download dialog box opens when you open the Utilities menu, and
then choose Download Code. Use this dialog box to update the radio firmware.
"Firmware" is the program that runs in a RadioLinx Frequency Hopping Radio
that allows it to communicate and exchange data with other radios. Different
versions of the firmware communicate with other radios in different ways, and
provide different levels of functionality.
In order for your RadioLinx Frequency Hopping Radio to communicate with other
radio devices, all radios on the network must use the same firmware version.
Select Radio Type: Choose the correct radio type from the dropdown list.
The firmware depends on the specific hardware in your radio. It is not
possible to load the firmware for a different type of radio.
Change Directory: Click this button to navigate to the directory where the
firmware file is located.
Load Code: Click this button to begin transferring the firmware from the
configuration PC to the radio. Do not disconnect the cable or turn off power to
the radio during this operation.
Cancel: Click the Cancel button to close the dialog box and discard your
changes.
Help: Click the Help button to read the online help for ControlScape.
