Page 25 of 59
TN2009-02A-A4-1.1
Setup RadioLinx OPC Server
Date: Dec-08 February 09
C.2. Installations:
C.2.1. RadioLinx OPC Server:
The RadioLinx OPC Server Software is available on our web site at the following link:
http://www.prosoft-technology.com/content/view/full/11315
1. Click on RadioLinx OPC Server Software for Windows XP and Vista and choose "Save" to
download the software to a temp drive on your PC.
2. Unzip the file (RadioLinx_OPC_Server_1_1_4.zip).
3. Click on the ServerInstaller_1_1_7.msi icon to start the installation.
4. Accept the License Agreements.
If your system does not contain the .NET Framework 2.0 and .NET Framework 3.0
components, the following message appears:
If this is the case, you must download the .NET 3.0 Framework files to your system using the
following procedure.
C.2.2. .NET Framework:
The .NET Framework for Windows XP components could be downloaded from our web site at
the following link:
http://www.prosoft-technology.com/content/view/full/11315
1. Click .NET Framework for Windows XP (Contact ProSoft Technical Support if your
machine is using Windows NT).
2. Choose "Save" to download the zip file to the same directory where you downloaded
the RadioLinx OPC Server software.
3. Unzip the files (NETFRAMEWORK.zip).
4. Launch Dotnetfx3.exe under NETFX30.
5. Run the RadioLinx OPC Server setup file again by launching
ServerInstaller_1_1_4.msi.
6. Follow the prompts to complete the installation.
