Page 14 of 59
TN2009-02A-A4-1.1
Setup RadioLinx OPC Server
Date: Dec-08 February 09
B. Setting of the Remote/Repeater radio
B.1. Plug the cables to the RLXIB-IHW:
From left to right: Power connector, serial port and Ethernet port.
Plug the power cable.
For Ethernet connection:
• If you are connecting to the radio through an Ethernet hub or switch, use the
gray (straight-through) cable.
• If you are connecting to the radio directly from your PC without going through
an Ethernet hub or switch, you must use the red (crossover) cable.
