82
The User Interface Does Not Open
5. Click “Internet / DSL Information” in the menu and se-
lect the “Line Settings” tab. In the “Annex Settings” sec-
tion, make sure that the annex working on your DSL line
is set. Save your settings by clicking “Apply”.
After the annex setting has been changed, the FRITZ!Box re-
starts automatically. The connection to the DSL network has
been established as soon as the “Power” LED stops flashing
and remains lit up.
14.2 The User Interface Does Not Open
If an error message is returned when you open the FRITZ!Box
user interface, this can have various causes. Check the
causes listed below and attempt to resolve the error.
Restarting the FRITZ!Box
The user interface cannot be opened or does not react.
Inconsistencies within the FRITZ!Box.
1. Restart the FRITZ!Box.
Remove the power cable from the outlet.
2. Wait about five seconds before reconnecting to the pow-
er supply.
3. To make sure that the FRITZ!Box has finished restarting,
wait until the “Power” LED lights up and stops flashing
and, if you have switched on WLAN, the “WLAN” LED re-
mains lit up as well. This ensures that the FRITZ!Box re-
start has been completed.
4. Try again to open the FRITZ!Box user interface by enter-
ing fritz.box
in the address field.
Cause
Help
FRITZ!Box 3270-en.fm Seite 82 Mittwoch, 14. März 2012 2:44 14
