
27
Minimumdistancesfromtheheat
sources
- from the electric gas and other
ovens - 30 mm,
- from oil or coal red ovens - 300
mm,
- from built-in ovens - 50 mm
If there is no possibility of ensuring the above- men-
tioned distances, provide an appropriate insulation
board.
Therearwalloftherefrigerator,inparticu-
lar,thecondenserandotherelementsof
thecoolingsystemmustnotcontactother
elements,whichmaydamagethem,(e.g.
centralheatingpipesandthewatersupply
pipes).
Itisforbidden toreadjustor modifyany
partsoftheunit.Itiscrucialnottodamage
thecapillarytubevisibleinthecompressor
recess.Thetubemaynotbebent,straigh-
tenedorwound.
Ifthecapillarytubeisdamagedbytheuser
theguaranteewillbevoid(g.5).
Mainsconnection
lBeforethe appliance is connected tothe
mains,settheadjustmentknobtothe"OFF"
/“0”position.
lThis appliance should be connected to AC 230V
50Hz supply socket. The socket must be tted
properly, and must be supplied with an earthing
conduit and a 10A fuse.
lIt is a legal requirement that the appliance is pro-
perly earthed. The manufacturer will not be held
liable for any damage or injury which may result
from the failure to full this requirement.
Do not use adapters, multiple sockets and
two-wire extension leads. If it is necessary
to use the extension lead, it must be equ-
ipped with a protection ring and a single
socket and must have a VDE/GS safety
certicate.
lIf an extension lead is used (with a protec- tion ring
and safety certicate), its socket must be located
at a safe distance, away from the sinks, and must
not be in a place where it could be ooded by
water or waste water.
lSee the type plate at the lower part of the internal
wall of the appliance for detailed specica- tions.
Disconnectingthemains
lMake sure the appliance can be easily disconnec-
ted from the mains, either by pulling the plug out
of the mains socket, or by switching the two-pole
switch off (g. 6).
l Ontheexteriorsurfaceoftheproductmaybea
protectivefoil,thisfoilsshouldberemoved.
l Make sure the appliance is placed in a horizontal
position by screwing in the 2 adju- stable front legs
(g. 3)
EN