Chapter 1 - Using AlvariCRAFT Getting Started
AlvariCRAFT Device Manager 10 User Manual
1 Click on the Open SU/RB button. The Equipment Editor for SU/RB opens,
allowing to define the Device Name and SNMP properties of the device to be
managed.
2 Enter the Device Name (optional) and SNMP properties of the device you want
to manage.
3 Click OK. The Device Manager for the specified device will open.
The Set IP feature enables to configure the IP parameters in a device based on its
MAC address. This enables managing a device whose previous IP parameters are
not known.
1 Click on the Set IP button. The Set IP window opens.
2 Enter the MAC Address of the device using the format xx-xx-xx-xx-xx-xx.
3 Enter the IP parameters to be used by the device (IP Address, Subnet Mask,
Default Gateway).
4 Enter the Read/Write Community string used by the device.
5 Click OK. After configuring the new values in the defined device it will be reset
to apply the changes.
To use the Set IP feature:
