LED 1 (Red) will switch on if the RSSI reach the value set in an entry field next to it.
LED 2 (Yellow) will switch on if the RSSI reach the value set in an entry field next to it.
LED 3 (Green) will switch on if the RSSI reach the value set in an entry field next to it.
LED 4 (Green) will switch on if the RSSI reach the value set in an entry field next to it.
Wireless Traffic Shaping
Wireless Traffic shaping feature is dedicated for upstream and downstream bandwidth
control while looking from the client (connected on Ethernet interface) perspective.
Traffic Shaping: The traffic can be limited at the AirOS based device in the upload
and download direction based on a user defined rate limit. This is layer 3 QoS.
Enable Traffic Shaping: control will enable bandwidth control on the device.
Incoming Traffic Limit: specify the maximum bandwidth value in kbps for traffic
passing from wireless interface to Ethernet interface.
Outgoing Traffic Limit: specify the maximum bandwidth value in kbps for traffic
passing from Ethernet interface to wireless interface.
QoS
Wi-Fi Multimedia (WMM) is a component of the IEEE 802.11e wireless LAN standard
for quality of service (QoS). The QoS assigns priority to the selected network traffic,
prevents packet collisions and delays thus improving VoIP calls and watching video
over WLANs. 802.11e / WMM: This allows for improved latency performance for
Voice and Video applications. This is layer 2 QoS and happens at 802.11 frame level.
QoS (WMM) Level: choose the type of the network traffic to which the priority will be
set or disable the QoS feature. No QoS – disable QoS.
Video Priority – enable priority of the video traffic.
Voice Priority – enable priority of the voice traffic.
Services
This page covers the configuration of system management services SNMP and Ping
Watchdog.
